Heatmiser UH8 - 8 Zone Wiring Centre Controller (230v)

The Heatmiser UH8 underfloor heating wiring centre can be used with any 230v room thermostat, but it is specifically made to work with our 4-channel 230v time clock (TM4 v2) and 230v set-back thermostat (DS-SB v3).

The UH8 can regulate up to eight zones. The UH8 has two heating time channels; you can choose which time channel it should use by adjusting each zone. There are two more time channel connections available for controlling the hot water or other auxiliary equipment. A 230v output is available to switch the appropriate zone actuator, underfloor heating pump, and valve upon demand from any zone. The boiler is compatible with practically all boiler types because it comes with a volt-free connection.

Zone 8 can be used to control a radiator zone using a straightforward slide switch. Zone 8 does not activate the boiler, valve, or underfloor heating pump when it comes to radiator control. Each zone can have a maximum of four actuators linked to it.
Dimensions: 384x148x60 mm (LxHxD)