18mm Gypsum UFH Overlay Panel – 12mm Pipe, 0.72m²

This 18mm high-density gypsum overlay panel is designed for underfloor heating layouts using 12mm pipe. Each panel covers 0.72m², helping you calculate board quantities for the heated floor area. It is a different floor-system choice from the 16mm-pipe EPS panels in the range. Match the board, pipe and return routing to one consistent layout, then check the substrate and floor-finish specification before you place the order.

Key features

• High-density gypsum board
• 18mm panel thickness
• Designed for 12mm UFH pipe
• 0.72m² panel coverage

Specifications

Choosing and using this product

The heating panel supports a routed overlay layout and helps spread heat across the floor. Specify the system as a whole: board routing, end returns, pipe, manifold and controls. The board thickness does not describe the complete finished floor build-up.

What else might I need?

• 18mm overlay end returns
• Brenton manifolds
• 16mm-pipe EPS400 panels

Check component compatibility against your system specification before ordering.

Frequently asked questions

Can I use 16mm pipe in this panel?

The listing specifies 12mm pipe. Choose a panel explicitly intended for 16mm pipe if that is your system size.

Are end returns the same product?

No. The separate 18mm end-return boards guide the pipe at the end of a run.

Is the panel a complete heating system?

No. Pipe, suitable manifold/control components and the remaining floor layers are required.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.