Heatmiser UH8-RF - 8 Zone Wireless Centre Controller / Receiver

Our 8 Zone wireless wiring centre, the Heatmiser UH8-RF v2, is made to function with our Slimline-RF v3 and NeoAir v3 thermostats.

Because it offers central switching, the UH8-RF v2 is perfectly positioned adjacent to the underfloor heating manifold. In addition to offering an output for a hot water cylinder, eight zones can be controlled. A 230v output is available to switch the appropriate zone actuators, underfloor heating pump, and valve upon demand from any zone. The boiler is compatible with practically all boiler types because it comes with a volt-free connection. The installer can have a completely wireless system by using RF to send the boiler signal to the RF Switch v2.

Each zone can have up to six actuators connected to it. When the wireless signal is limited or the UH8-RF v2 is installed in a metal cabinet, an external aerial can be used.

You may set up the thermostat's software to determine which zones are radiators and which are underfloor heating. When there is a demand for heat, radiator zones will not activate the boiler, valve, or underfloor heating pump. Radiator zones should use the valve's end switch to activate the boiler.

• Central wiring for a maximum of eight areas
• Option for DIN Rail Mounting (DIN Rail is not supplied)
• When any thermostat indicates that heat is needed, the output for the underfloor heating valve and pump is triggered.
• Wireless Fail Safe Operation
• Wireless Boiler Link (Optional RF Switch v2)
• Compatible with our NeoAir v3 and Slimline-RF v3
• Multiple radiator zones' output
• Hot water output for the home
• Outputs of the actuator: 230v
• Dimensions: 384x148x60 mm (LxHxD)