Brenton Gypsum Fibre Overlay Underfloor Heating Kit – 1 Zone, 150mm Centres

Plan a 1-zone wet underfloor heating installation with the Brenton gypsum fibre overlay kit, specified for 12mm pipe at 150mm centres. This package brings together the floor-system components, manifold, pump/blending pack and heating controls listed below. A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices. Select the area option that matches your project, then confirm the component quantities and floor construction before ordering.

Listed kit components

• 12mm PERT-AL-PERT pipe
• Brenton manifold with pipe fittings
• Grundfos pump/water-temperature control pack with Brenton blending valve
• Brenton 22mm 2-port zone valve
• 18mm gypsum fibre boards for 12mm pipe at 150mm centres
• Heatmiser Slimline programmable room thermostat

These are the component types in the package description. Quantities and the final bill of materials depend on the selected area option; confirm them before ordering.

Key features

• 18mm high-density gypsum fibre overlay boards
• 12mm PERT-AL-PERT pipe specified in the existing component list
• 150mm pipe centres in the routed board layout
• Brenton manifold and Grundfos pump/blending components listed

Specifications

Choosing and using this product

The heavy overlay system combines routed gypsum fibre boards with 12mm pipe. It differs from the 16mm-pipe EPS and XPS systems, so order the correct pipe connectors and returns for the design. Board thickness is only one part of the finished floor height. A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices.

Planning the controls and any extras

• View Heatmiser Slimline thermostat specifications
• Review Heatmiser UH8 wiring-centre specifications

Check component compatibility against your system specification before ordering.

Frequently asked questions

What does the 1-zone designation mean?

A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices.

Does this kit use the same pipe as EPS or XPS overlay kits?

This gypsum fibre kit specifies 12mm pipe. The EPS and XPS packages on this site specify 16mm pipe. Match board channels, manifold connectors and any extra pipe to the selected system.

Does the kit area guarantee it will heat my property?

No. The area option identifies the package choice. Suitability and heat output require a room-by-room heat-loss calculation, the intended flow temperature and the proposed floor construction.

What should I confirm before ordering?

Ask for the exact bill of materials for the chosen area: pipe length, manifold ports, thermostat quantities, actuators and wiring centre requirements. Confirm any insulation, adhesives and floor-finish layers separately.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.