Brenton Heat Emission Plate Underfloor Heating Kit – 5 Zones, 200mm Centres

Plan a 5-zone wet underfloor heating installation with the Brenton heat emission plate kit, specified for 16mm pipe at 200mm centres. This package brings together the floor-system components, manifold, pump/blending pack and heating controls listed below. Five heating zones serve a five-area control plan. For a project of this scope, confirm loop lengths, manifold position and all required control components against the floor plan before ordering. Select the area option that matches your project, then confirm the component quantities and floor construction before ordering.

Listed kit components

• 16mm aluminium-core multilayer pipe
• Brenton manifold with pipe fittings
• Grundfos pump/water-temperature control pack with Brenton blending valve
• Brenton 22mm 2-port zone valve
• Aluminium heat emission plates for 200mm pipe centres
• Heatmiser Slimline programmable room thermostat

These are the component types in the package description. Quantities and the final bill of materials depend on the selected area option; confirm them before ordering.

Key features

• Heat emission plate system with 200mm pipe centres
• 16mm multilayer pipe specified in the package description
• Aluminium plates to spread heat across the floor construction
• Manifold, blending pack, zone valve and thermostat components listed

Specifications

Choosing and using this product

The aluminium plates support a planned pipe layout at 200mm centres. Confirm the joist arrangement, plate support and floor-deck construction before choosing this system. Plate dimensions and pipe spacing must match the installation drawing. Five heating zones serve a five-area control plan. For a project of this scope, confirm loop lengths, manifold position and all required control components against the floor plan before ordering.

Planning the controls and any extras

• View Heatmiser Slimline thermostat specifications
• Review Heatmiser UH8 wiring-centre specifications

Check component compatibility against your system specification before ordering.

Frequently asked questions

What does the 5-zone designation mean?

Five heating zones serve a five-area control plan. For a project of this scope, confirm loop lengths, manifold position and all required control components against the floor plan before ordering.

Can I substitute any standalone heat emission plate?

Check the groove, pipe size, plate dimensions and pipe centres first. A plate listed at 150mm centres is a different layout from this 200mm-centre kit.

Does the kit area guarantee it will heat my property?

No. The area option identifies the package choice. Suitability and heat output require a room-by-room heat-loss calculation, the intended flow temperature and the proposed floor construction.

What should I confirm before ordering?

Ask for the exact bill of materials for the chosen area: pipe length, manifold ports, thermostat quantities, actuators and wiring centre requirements. Confirm any insulation, adhesives and floor-finish layers separately.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.