Brenton Screed Underfloor Heating Kit – 1 Zone, 200mm Centres

Plan a 1-zone wet underfloor heating installation with the Brenton screed kit, specified for 16mm pipe at 200mm centres. This package brings together the floor-system components, manifold, pump/blending pack and heating controls listed below. A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices. Select the area option that matches your project, then confirm the component quantities and floor construction before ordering.

Listed kit components

• 16mm aluminium-core multilayer pipe
• Brenton manifold with pipe fittings
• Grundfos pump/water-temperature control pack with Brenton blending valve
• Brenton 22mm 2-port zone valve
• Edge strip and 60mm pipe clips
• Heatmiser Slimline programmable room thermostat

These are the component types in the package description. Quantities and the final bill of materials depend on the selected area option; confirm them before ordering.

Key features

• 200mm pipe centres for the specified screed layout
• 16mm multilayer pipe with aluminium core
• Manifold, pump/blending pack and heating controls listed as package components
• Edge strip and 60mm pipe clips included in the component list

Specifications

Choosing and using this product

This pipe-in-screed package is intended for projects where warm-water pipework is fixed before the screed is laid. The 200mm pipe layout must be checked against the room heat-loss calculation and proposed floor covering. A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices.

Planning the controls and any extras

• View Heatmiser Slimline thermostat specifications
• Review Heatmiser UH8 wiring-centre specifications

Check component compatibility against your system specification before ordering.

Frequently asked questions

What does the 1-zone designation mean?

A single heating zone is useful where the whole served area follows one temperature schedule. A large zone can still require several pipe loops; zone count and manifold port count are different design choices.

Is 200mm spacing right for every room?

No. Pipe spacing must follow the heat-loss and floor-construction design. A room with a higher heat demand may require a different layout; the area option alone does not establish heat output.

Does the kit area guarantee it will heat my property?

No. The area option identifies the package choice. Suitability and heat output require a room-by-room heat-loss calculation, the intended flow temperature and the proposed floor construction.

What should I confirm before ordering?

Ask for the exact bill of materials for the chosen area: pipe length, manifold ports, thermostat quantities, actuators and wiring centre requirements. Confirm any insulation, adhesives and floor-finish layers separately.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.