25x16mm Reducer - Unequal Straight Union - MLCP PressFit

Join two different compatible multilayer-pipe diameters in a straight route with an MLCP press reducer. Select both dimensions from the pipework drawing and check the correct orientation before assembly. Each end needs the pipe preparation and jaw size specified by the fitting system, so do not assume that one nominal size describes the complete fitting.

Key features

• Straight reducer connection form
• For a compatible multilayer pipe / fitting system
• Select the assigned size option for the pipework design

Specifications

Choosing and using this product

Use pipe and fittings specified as a compatible system. Confirm pipe outside diameter and wall thickness, prepare the cut end, check full insertion and use the approved press-jaw profile. Follow the manufacturer’s pressure-test procedure.

What else might I need?

• MLCP Press Straight Coupler
• MLCP Press Unequal Tee

Check component compatibility against your system specification before ordering.

Frequently asked questions

Can I identify the reducer by one diameter?

No. The larger and smaller connection dimensions must both match the design.

Which pressing tool should I use?

Use the jaw profile and size specified for this fitting system; another fitting’s requirements do not establish compatibility.

What should I check before ordering?

Confirm connection dimensions, pipe specification, intended service and the quantity supplied per purchase.

Need help with your product choice? Call 0116 319 6618. Check delivery information before ordering.