3m Underfloor Heating Thermostat Floor Probe

Measure floor temperature using this thermostat probe with a three-metre lead. It is intended for a compatible underfloor heating thermostat with an appropriate floor-sensor input. Check the required sensor type and resistance characteristic before buying a replacement, and confirm whether the thermostat uses the probe for floor sensing, limiting or another supported control mode.

Key features

• 3m sensor lead
• Floor-temperature sensing
• Requires a thermostat with a matching sensor specification

Specifications

Choosing and using this product

Check the thermostat’s supported sensor type, resistance characteristic and sensing mode. Install the probe as instructed by the thermostat and floor-system manufacturers.

What else might I need?

• Heatmiser neoAir v3 Wireless Programmable Thermostat
• Heatmiser neoAir v3 Wireless Thermostat with Floor Probe

Check component compatibility against your system specification before ordering.

Frequently asked questions

Does this work with every thermostat?

No. The sensor specification and thermostat input must match. Confirm compatibility before ordering.

Does a floor probe control room air temperature?

It measures floor temperature. How the reading is used depends on the thermostat’s available sensing modes.

Where should it be installed?

Follow the thermostat and floor-system instructions for probe position and any protective conduit.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.