EPS400 Foil-Faced UFH Panel – 20mm, 16mm Pipe, 0.72m²

Build a low-profile pipe layout with this foil-faced EPS400 underfloor heating panel. Each panel covers 0.72m² and is 20mm thick, with channels for 16mm pipe at 150mm centres. It is listed for solid-floor and retrofit systems, giving installers a defined pipe route while keeping the floor build-up easier to plan. Check the complete floor specification, including substrate, adhesives and final covering, before ordering your panel quantity.

Key features

• Foil-faced EPS400 polystyrene
• 20mm panel thickness
• 16mm pipe channels at 150mm centres
• 0.72m² coverage per panel

Specifications

Choosing and using this product

The panel dimensions describe the heating board alone, not the finished floor height. Allow for all other layers in your design. Coordinate straight runs and transitions before ordering so the board layout and pipe route work together; confirm floor-finish requirements with the system specification.

What else might I need?

• Brenton 16mm pipe
• EPS transition boards
• UFH manifolds

Check component compatibility against your system specification before ordering.

Frequently asked questions

Does 20mm mean the finished floor height?

No. It is the panel thickness; adhesives, levelling and floor finishes can add to the build-up.

Which pipe size fits the listed channels?

This panel is listed for 16mm pipe at 150mm centres.

How many panels do I need?

Use the floor layout and 0.72m² coverage per panel, allowing for cuts and any transition boards.

Need help with your product choice? Call 0116 319 6618. For a complete underfloor heating project, send your floor plans for a quotation. Check delivery information before ordering.