16x2mm MLC Pipe - 500m Coils - WRAS Approved

Brenton Underfloor Heating & Plumbing Multi Layer Composite Pipe (MLCP)

The Brenton Multi Layer Composite Pipe  consists of 5 layers. One polyethylene layer is applied to the inside and one to the outside of the welded aluminium  pipe. Both PE layers are permanently bonded to the aluminium pipe by means of an adhesive layer. The polyethylene used is a non-cross-linked polyethylene  of raised temperature (PE-RT – polyethylene of raised temperature resistance).

The pipe has WRAS approval so pipe quality and integrity can be assured, with the approved press-fit system this also means that any of cuts from the underfloor heating system can be used for potable drinking water and radiator installations 

Key Benefits

• The aluminium core is 100% oxygen diffusion tight, therefore preventing the ingress of any oxygen.
• Compensates and reduces snap-back forces and heat expansion with changes of temperature
• System is designed for easy, safe and fast pipe installation
• Smooth, low friction bore (roughness k = 0.0004)
• Maximum temperature: 95℃
• Form-stable, no spring back forces
• Linear expansion closer to that of copper than any other plastic pipe (0.025mm/m x K)
• Maximum operating temperature (at 70℃) 10 bar

50 Year Pipe Warranty

Technical:

• Diameter: 16mm x 2mm

• Internal diameter: 11.95mm ± 0.1mm 
• Minimum bend radius: 80mm
• Weight: 0.102kg/m
• Water volume: 0.113L/min

Operating Pressure and Temperature:

1. Normal operating temperature to: 60°C
2. Normal operating pressure to: 6 bar
3. Minimum failure temperature: 95°C
4. Minimum failure pressure: 10 bar